Bright spring days, went to a beautiful spring season. Do not forget to check out before thevehicle safety oh

Good brake is an important guarantee for traffic safety, so it is one of the important daily work,4S shop repair factory.

Most cars use a front disc and drum brake structure, general front brake wear relatively fast,after the brakes use a relatively long period of time, in the daily inspection and maintenanceshould pay attention to the following aspects:

1, under normal driving conditions every 5000 km of brake check once, not only to check the remaining thickness, but also check the shoe wear condition, the wear degree on both sides is the same, whether to freely return, found abnormal situation must be addressed immediately.

2, the brake plate and the friction material is composed of two parts, the general lining made of iron, such as friction materials must not wear no part to replace shoe. Some vehicles with brakealarm function, upon reaching the wear limit, the instrument will alarm replacement shoe. To limit the use of the shoe must be replaced, even if still can be used for a period of time, also can reduce the braking effect, impact on traffic safety.

3, to replace the brake pads, replace the original spare parts provided by the only way to make the brake pad and the brake disc brake effect best, minimal wear.

4, the replacement of the shoe pads must use special tools to brake pump back to the top. Do not use a crowbar hard pressed back, so easy to cause the brake caliper guide screw bending,so that the brake clamp.

5, the replacement of shoe, must walk a few feet to eliminate the gap of brake, shoe pad and the brake disc, causing the first foot brake, prone to accidents.

6, after the replacement of brake pads, to running 200 kilometers to reach the best braking performance, just change the shoe must be careful driving.