Welcome to TAIZHOU CHENHUI MACHINERY MANUFACTURING CO., LTD.   ChinaEnglish
 
LOGO TAIZHOU CHENHUI MACHINERY MANUFACTURING CO., LTD.
HOME ABOUT US PRODUCTS NEWS EQUIPMENT SERVICE CONTACT US
 
Exhibitions
Industry Information
 
 
Sales Network
 
Tel:0086-576-89908088
       0086-576-87284458
Fax: 0086-576-87264010
E-mail: chenhui@zjchenhui.com.cn
 
Home > News > News Details
News Details
 
Hub maintenance Note
Release time2015.11.24 News sourceTAIZHOU CHENHUI MACHINERY MANUFACTURING CO., LTD. Browsing number
 
Mentioned car maintenance, many owners will think of engine and tire, and small wheels let us completely ignored, but we have to know the hub is good or bad relationship with the quality of automobile tires, which is related to the safety of our lives, so that small wheels are also required to maintain our, so if where because we maintain undeserved hub appears damaged, how are we going to repair? Morninghope is for everyone to introduce.
Note on the daily maintenance of wheel hub:
1, when the wheel temperature is high, should make it natural cooling after cleaning, do not use cold water to clean; otherwise, will make aluminum alloy wheel, and even make the brake disc deformation and affect the brake effect. In addition, at high temperature, with a cleaning agent to clean the aluminum alloy wheels, will make the wheel surface chemical reaction, lose luster, the impact is beautiful.
2, when the wheel is difficult to remove the surface of the asphalt, if the general cleaning agent to help, can be used to clean the brush, but do not use a strong brush, especially iron brush, so as not to damage the wheel surface. Experts of the remedies for tar removal: choose medicinal "oil" inunction, obtain the result that expect is less than, owners may wish to try.
A slight scratch can repair itself:
Step 1: clean the wheel. We can use paint dilution, wipe the wound around, remove dirt. Scratch the deepest part is very difficult to remove dirt, when available, will it completely clean toothpick. In the cleaning time, in order to prevent mistakenly independent part of the paint, the best will be carefully in the tape around the scars.
The second step: owners finishing hair nib, painted to the hub of damage in the varnish, and then paint drying, in painted slightly protruding, and is convenient for the owners are observed.
The third step: the main and other modified paint is completely dry, in the use of water - coated paper dipped in soapy water, so that the surface smooth. Then use the mixture to wipe out the light, then wax.
The fourth step: if the owner found on the wheel with a deep scar, but also to observe whether the metal surface is exposed, if you can not see the metal surface will not rust, can concentrate on the modified paint. Go with one point one NIB point location, then the paint is completely dry. If you find out the metal, it's best to change.
 
 
Copyright © 2014 TAIZHOU CHENHUI MACHINERY MANUFACTURING CO., LTD. Tel:0576-89908088 Technical support:CENST