Welcome to TAIZHOU CHENHUI MACHINERY MANUFACTURING CO., LTD.   ChinaEnglish
 
LOGO TAIZHOU CHENHUI MACHINERY MANUFACTURING CO., LTD.
HOME ABOUT US PRODUCTS NEWS EQUIPMENT SERVICE CONTACT US
 
Exhibitions
Industry Information
 
 
Sales Network
 
Tel:0086-576-89908088
       0086-576-87284458
Fax: 0086-576-87264010
E-mail: chenhui@zjchenhui.com.cn
 
Home > News > News Details
News Details
 
Repair methods for common car failures
Release time£º2017.12.21 News source£ºTAIZHOU CHENHUI MACHINERY MANUFACTURING CO., LTD. Browsing number£º
 

In the long-term use of the car, there will be some minor glitches and glitches, let alone used cars. Especially the tires, fuel consumption, braking system is the most vulnerable to safety hazard. So how do you deal with these situations? What are the maintenance methods for common car failures? Let's take a look at this.

Common failure: the tire is broken by foreign body.

The tires are the most vulnerable to wear and tear. Especially when go mountain roads will always be broken stones or nail pierced the tire of many car owners in order to save trouble, to the side of the road repair shop mending continued on his way, this method can only temporary remedy, plenty of safety when driving at high speed. It is suggested that the owner should find a professional repair shop after the repair, because the professional repair shop will have the special tool to remove the tire, and the repair will be more secure with the special vulcanizing machine.

Common faults: oil consumption increases greatly.

After a while, many car owners will find that the gas mileage increases by more than 10 percent. In fact, the increase in fuel consumption also indicates the potential failure of vehicles. This is the first step to understand the reasons for the increase in fuel consumption and then to resolve it. There are many factors contributing to the increase in fuel consumption. For example, the slip of the clutch will cause the engine to lose the number of revolutions, resulting in a surge in fuel consumption and the need to replace the clutch pressure plate and drive wheel in time.

Common failure: braking system fails.

Brake system failure includes: the brake pedal is too large, the brake function is slow, the braking efficiency is very low or even lost, brake distance grows. There are three kinds of troubleshooting methods. Continuous on the brake pedal, such as pedal increased and elastic feeling, but after a pause when the pedal is still very low, is the brake system with air, then deal with exhaust braking system. One foot brake does not have the spirit, but the brake effect is very good when the pedal several times on the pedal, generally is the brake pedal free stroke too big or the brake clearance is too big. The pedal free travel should be adjusted, then the brake clearance should be checked and the brake disassembly should be repaired if necessary. Recommended reading: how to determine whether the tire should be replaced

For car appear all sorts of small fault, the owner must not be ignored, it is to remind you the vehicle contact failure, timely solve or replacement, not only can protect the safety of driving, also can prolong the service life of the vehicle. So, please pay attention.


 
 
Copyright © 2014 TAIZHOU CHENHUI MACHINERY MANUFACTURING CO., LTD. ¡¡¡¡Tel:0576-89908088 Technical support:CENST